54
D-Link DIR-400 User Manual
Section 3 - Configuration
Enter a new Login Name for the Administrator
account. The default Login Name is
admin
.
Note that the Login Name is case-sensitive,
e.g.
admin
would be a different Login Name
than
Admin
.
Enter a new password for the Administrator Login
Name and then retype the new password in the
Confirm Password textbox. The administrator
can make changes to the settings.
Remote management allows the DIR-400
to be configured from the Internet through a
web browser. The Administrator Login Name
and Password are still required to access the
web management interface. Normally, only a
member of your network can browse the built-
in web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from a remote
(Internet) host.
The Internet IP address of the computer that has access to the router. If you input an asterisk (*) into this field, then any
computer will be able to access the router. Putting an asterisk (*) into this field would present a security risk and is not
recommended.
The port number used to access the DIR-400. For example: http://x.x.x.x:8080, where x.x.x.x is the WAN IP address of
the DIR-400 and
8080
is the port used for the web management interface.
Administrator
Login Name:
Administrator
Password:
Enable Remote
Management:
IP Allowed to
Access:
Port:
Device Administration
This window will allow you to change the Administrator password. You can also enable Remote Management from this
screen.
Summary of Contents for DIR-400
Page 1: ......
