D-Link DIR-400 User Manual Download

Page: 27 / 111

D-Link DIR-400 User Manual

Section 3 - Configuration

Enter the IP address assigned by your ISP.

Enter the Subnet Mask assigned by your ISP.

Enter the ��ateway assigned by your ISP.

The default MAC Address is set to the WAN’s

physical interface MAC address on the router. It is

not recommended that you change the default MAC

address unless required by your ISP.

The default MAC address is set to the WAN’s

physical interface MAC address on the router. You

can use the

Clone MAC Address

button to copy the

MAC address of the Ethernet Card installed by your

ISP and replace the WAN MAC address with the

MAC address of the router. It is not recommended

that you change the default MAC address unless

required by your ISP.

Enter the Primary DNS server IP address assigned

by your ISP.

This is optional.

Maximum Transmission Unit - you may need to

change the MTU for optimal performance with your

specific ISP.

1492

is the default MTU.

IP Address:

Subnet Mask:

ISP Gateway:

MAC Address:

Clone MAC

Address:

Primary DNS

Address:

Secondary DNS

Address:

MTU:

Internet Setup

Static (assigned by ISP)

Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet

mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the

appropriate IP form; the router will not accept the IP address if it is not in a valid format.

Summary of Contents for DIR-400
















































































































Search results

Summary of Contents for DIR-400

Reviews:

Related manuals for DIR-400

Brands by name

Popular brands

D-Link DIR-400, User Manual

Search results

Summary of Contents for DIR-400

Reviews:

Related manuals for DIR-400

Brands by name

Popular brands