7
D-Link DIR-400 User Manual
Section 4 - Security
Configuring WPA, WPA2, & WPA/WPA2 (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a web browser
and entering the IP address of the router (19.168.0.1). Click
on
Wireless Settings
on the left side.
2.
Next to
Security Mode
, select
Enable WPA Only Wireless
Security (enhanced),
Enable WPA2 Only Wireless Security
(enhanced),
or
Enable WPA/WPA2 Wireless Security
(enhanced)
.
3.
Next to
Cipher Type
, select
TKIP
,
AES
,
or
Auto
.
4.
Next to
PSK/EAP
, select
EAP
.
5.
Next to
RADIUS Server 1
enter the
IP Address
of your RADIUS server.
6.
Next to
Port
, enter the port you are using for your RADIUS server.
1812
is the default port.
7.
Next to
Shared Secret
, enter the security key.
8.
If you have a secondary RADIUS server, enter its IP address, port, and secret key.
9.
Click
Save Settings
to save your settings.
Note:
When using EAP mode, you cannot have WPS enabled.
Summary of Contents for DIR-400
Page 1: ......
