71
D-Link DIR-400 User Manual
Section 4 - Security
Configuring WPA/WPA2-PSK
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a
web browser and entering the IP address of the router
(19.168.0.1). Click on
Wireless Setup
on the left
side.
2.
Next to
Security Mode
, select
Enable WPA/WPA2
Wireless Security (enhanced)
.
3.
Next to
Cipher Mode
, select
TKIP
,
AES
,
or
Both
.
4.
Next to
PSK/EAP
, select
PSK
.
5.
Next to
Network Key
, enter a key (passphrase). The key is an alpha-numeric password between 8 and 63 characters
long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all
other wireless clients.
6.
Click
Save Settings
to save your settings. If you are configuring the router with a wireless adapter, you will lose
connectivity until you enable WPA/WPA2-PSK on your adapter and enter the same passphrase as you did on the
router.
Summary of Contents for DIR-400
Page 1: ......
