D-Link DIR-400 User Manual Download

Page: 10 / 111

D-Link DIR-400 User Manual

Section - Installation

Before you Begin

Installation

This section will walk you through the installation process. Placement of the router is very important. Do not place the

router in an enclosed area such as a closet, cabinet, or in the attic or garage.

Please configure the router with the computer that was last connected directly to your modem. Also, you can only

use the Ethernet port on your modem when connecting the modem to the router. If you were using the modem’s USB

connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an

Ethernet cable to the WAN port on the router, and then turn the modem back on. In some cases, you may need to call

your ISP to change connection types (USB to Ethernet).

If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as

WinPoet, Broadjump, or Ethernet 300 from your computer or you will not be able to connect to the Internet.

Summary of Contents for DIR-400
















































































































Search results

Summary of Contents for DIR-400

Reviews:

Related manuals for DIR-400

Brands by name

Popular brands

D-Link DIR-400, User Manual

Search results

Summary of Contents for DIR-400

Reviews:

Related manuals for DIR-400

Brands by name

Popular brands