73
D-Link DIR-400 User Manual
Section 5 - Connecting to a Wireless Network
Connecting to a Wireless Network
Using Windows
®
XP
Windows
®
XP users may use XP’s built-in wireless utility (Zero Configuration Utility). The following instructions are
for Service Pack users. If you are using another utility or Windows
®
000, please refer to the user manual of your
wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to
the Windows
®
XP utility as seen below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select
View Available
Wireless Networks
.
If you receive the
Wireless Networks Detected
bubble, click
on the center of the bubble to access the utility.
or
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) and click
the
Connect
button.
If you get a good signal but cannot access the Internet,
check your TCP/IP settings for your wireless adapter. Refer
to the
Networking Basics
section in this manual for more
information.
Summary of Contents for DIR-400
Page 1: ......
