D-Link DES-3350SR, Command Line Interface Reference Manual

Page: 240 / 379

DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
240
config 802.1x auth_parameter
Authentication parameters on a range of
ports. The default parameter will return all
ports in the specified range to their default
802.1x settings.
Syntax
config 802.1x auth_parameter ports
[<portlist>|all] [default|{direction
[both|in]|port_control
[force_unauth|auto|force_auth]|
quiet_period <sec 0-65535>| max_req
<value 1-10>|reauth_period <sec 1-
65535>|enable_reauth
[enabled|disabled]}]
Description The config 802.1x auth_parameter
command is used to configure the 802.1x
Authentication parameters on a range of
ports. The default parameter will return all
ports in the specified range to their default
802.1x settings.
Parameters
<portlist>
−
Specifies a range of ports. The
port list is specified by listing the lowest
switch number and the beginning port
number on that switch, separated by a
colon. Then highest switch number, and
the highest port number of the range (also
separated by a colon) are specified. The
beginning and end of the port list range are
separated by a dash. For example, 3
would
specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and
port 4
−
in numerical order.
all
−
Specifies all of the ports on the switch.
default
−
Returns all of the ports in the
specified range to their 802.1x default
settings.