D-Link DES-3350SR, Command Line Interface Reference Manual

Page: 351 / 379

DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
351
create ospf virtual_link
Parameters <area_id> − A 32-bit number in the form of
an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the
OSPF domain.
<neighbor_id>
−
The OSPF router ID for
the remote area. This is a 32-bit number
in
the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies
the remote area’s Area Border Router. The
router ID of the neighbor router.
<password 8>
−
A case-sensitive password.
hello_interval <sec 1-65535>
−
Allows the
specification of the interval between the
transmission of OSPF Hello packets, in
seconds. Between 1 and 65,535 seconds
can be specified. The Hello Interval, Dead
Interval, Authorization Type, and
Authorization Key should be the same for
all routers on the same network.
dead_interval <sec 1-65535>
−
Allows the
specification of the length of time between
the receipt of Hello packets from a
neighbor router before the selected area
declares that router down. An interval
between 1 and 65,535 seconds can be
specified. The Dead Interval must be
evenly divisible by the Hello Interval.
<key_id 1-255>
−
A previously configured
MD5 key ID (1 to 255).