D-Link DES-3350SR, Command Line Interface Reference Manual

Page: 172 / 379

DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
172
local>config link_aggregation algorithm
mac_source_dest
Command: config link_aggregation algorithm
mac_source_dest
Success.
local>
config lacp_port
Purpose Used to configure the current mode of the Link
Aggregation Control Protocol port.
Syntax
config lacp_port <portlist> mode
[active|passive]
Description This command is used to configure LACP mode
on a per port basis.
Parameters
portlist
−
Specifies a range of ports to be
configured.
mode [active|passive]
−
This setting can be
either active or passive.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To configure port LACP mode:
local>config lacp_port 1-12 mode active
Command: config lacp_port 1-12 mode active