D-Link DES-3350SR, Command Line Interface Reference Manual

Page: 344 / 379

DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
344
config ospf ipif
Purpose Used to configure the OSPF interface
settings.
Syntax
config ospf [ipif <ipif_name 12>/all {area
<area_id>|priority <value>|hello_interval
<sec 1-65535>|dead_interval <sec 1-
65535>|authentication [none|simple
<password 8>|md5 <key_id 1-
255>]|metric <value>|state
[enabled|disabled]}
Description This command is used to configure the
OSPF interface settings.
Parameters <ipif_name 12>
−
The name of the IP
interface.
priority <value>
−
The priority used in the
election of the Designated Router (DR). A
number between 0 and 255.
metric <value 1-65535>
−
The interface
metric (1 to 65535). Entering a 0 will allow
automatic calculation of the metric.
hello_interval <sec 1-65535>
−
Allows the
specification of the interval between the
transmission of OSPF Hello packets, in
seconds. Between 1 and 65535 seconds
can be specified. The Hello Interval, Dead
Interval, Authorization Type, and
Authorization Key should be the same for all
routers on the same network.
dead_interval <sec 1-65535>
−
Allows the
specification of the length of time between