D-Link DES-3350SR, Command Line Interface Reference Manual

Page: 82 / 379

DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
82
show snmp
also displayed.
host − This command is used to display the
IP addresses and configuration information
of remote SNMP managers that are
designated as recipients of SNMP traps that
are generated by the switch’s SNMP agent.
<ipaddr>
−
The IP address of a remote
SNMP manager that will receive SNMP
traps generated by the switch’s SNMP
agent.
user
−
This command displays information
about each SNMP username in the SNMP
group username table.
view
−
This command displays an SNMP
view previously created on the switch.
<view_name 32>
−
An alphanumeric string
of up to 32 characters that identifies the
SNMP view that will be displayed.
Restrictions none.
Example Usage:
To display SNMP community community strings
configured on the switch:
local>show snmp community
Command: show snmp community