D-Link DES-3350SR, Command Line Interface Reference Manual

Page: 243 / 379

DES-3350SR Layer 3 Fast Ethernet Switch User’s Guide
243
config 802.1x init
<portlist> − Specifies a range of ports. The
port list is specified by listing the lowest
switch number and the beginning port
number on that switch, separated by a
colon. Then highest switch number, and
the highest port number of the range (also
separated by a colon) are specified. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and
port 4
−
in numerical order.
all
−
Specifies all of the ports on the switch.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To initialize 802.1x port-based functions on ports 1 to
15:
local>config 802.1x init port-based ports 1-15
Command: config 802.1x init port-based ports 1-15
Success.
local>
config 802.1x reauth
Purpose Used to configure the 802.1x re-