manualshive.com logo in svg

D-Link DES-3252P - Web Smart Switch, Install Manual

Introducing the D-Link DES-3252P - Web Smart Switch! This advanced networking solution offers exceptional performance and flexibility. Ensure seamless installation and configuration with our easy-to-follow and comprehensive Install Manual - available for free download from manualshive.com. Simply access and unlock the full potential of your D-Link switch effortlessly!

Share
Download
background image

Configuring VLANs

 

Page 76 

Section 8. Configuring VLANs

VLANs are logical subgroups with a 

Local Area Network 

(LAN) which combine user stations and network devices 

into a single unit, regardless of the physical LAN segment to which they are attached. VLANs allow network traffic 
to flow more efficiently within subgroups. VLANs use software to reduce the amount of time it takes for network 
changes, additions, and moves to be implemented.

VLANs have no minimum number of ports, and can be created per unit, per device, or through any other logical 
connection combination, since they are software-based and not defined by physical attributes.

VLANs function at Layer 2. Since VLANs isolate traffic within the VLAN, a Layer 3 router working at a protocol 
level is required to allow traffic flow between VLANs. Layer 3 routers identify segments and coordinate with 
VLANs. VLANs are Broadcast and Multicast domains. Broadcast and Multicast traffic is transmitted only in the 
VLAN in which the traffic is generated.

VLAN tagging provides a method of transferring VLAN information between VLAN groups. VLAN tagging attaches 
a 4-byte tag to packet headers. The VLAN tag indicates to which VLAN the packets belong. VLAN tags are 
attached to the VLAN by either the end station or the network device. VLAN tags also contain VLAN network prior-
ity information.

Combining VLANs and

 Generic Attribute Registration Protocol 

(GARP) allows network managers to define net-

work nodes into Broadcast domains. 

This section contains the following topics: 

•

Defining VLAN Properties

•

Defining VLAN Membership

•

Defining VLAN Interface Settings

Summary of Contents for DES-3252P - Web Smart Switch














































































































































































































































































































Reviews:

No comments

Related manuals for DES-3252P - Web Smart Switch

tbs electronics RBS Series Manual preview
RBS Series
Brand: tbs electronics Pages: 2
UNICOM DynaGST/2402G GEP-33224T-1 Specifications preview
DynaGST/2402G GEP-33224T-1
Brand: UNICOM Pages: 1
UNICONTROL Electronic Cleveland Controls RSS-498-013 Manual preview
Cleveland Controls RSS-498-013
Brand: UNICONTROL Electronic Pages: 2
Cross Technologies 1582-225L2 Instruction Manual preview
1582-225L2
Brand: Cross Technologies Pages: 20
IDEM SAFETY SWITCHES KLM-P2L Operating Instructions preview
KLM-P2L
Brand: IDEM SAFETY SWITCHES Pages: 2
CTS FOS-3124 SERIES User Manual preview
FOS-3124 SERIES
Brand: CTS Pages: 223
NETGEAR ProSAFE JGS516PE Installation Manual preview
ProSAFE JGS516PE
Brand: NETGEAR Pages: 2
Black Box LGB408A-R2 Manual preview
LGB408A-R2
Brand: Black Box Pages: 20
Versa Technology VX-GPH8245 User Manual preview
VX-GPH8245
Brand: Versa Technology Pages: 26
M-E CUVEO CT-W2 Manual preview
CUVEO CT-W2
Brand: M-E Pages: 36
Kramer VP-26 User Manual preview
VP-26
Brand: Kramer Pages: 46
AV Link 128.823UK User Manual preview
128.823UK
Brand: AV Link Pages: 2
hager TX 206A Quick Start Manual preview
TX 206A
Brand: hager Pages: 4
APG FT-100 Series Operator'S Manual preview
FT-100 Series
Brand: APG Pages: 7
LEGRAND Chief Kontour KPWR Series Installation Instructions Manual preview
Chief Kontour KPWR Series
Brand: LEGRAND Pages: 8
Nortel BayStack 400-2FX Specifications preview
BayStack 400-2FX
Brand: Nortel Pages: 8
Gefen EXT-HDFST-848CPN User Manual preview
EXT-HDFST-848CPN
Brand: Gefen Pages: 88
Dahua SG4028 Quick Start Manual preview
SG4028
Brand: Dahua Pages: 17

Brands by name

Popular brands

Load more brands