manualshive.com logo in svg

D-Link DES-3252P - Web Smart Switch, Install Manual, Page: 184 / 301

Share
Download
D-Link DES-3252P - Web Smart Switch Install Manual Download Page 184

Managing System Files

Uploading System Files

 

Page 184 

Configuration Upload

The 

Configuration Upload 

section contains the following fields:

•

TFTP Server IP Address

 — Specifies the TFTP Server IP Address to which the Configuration file is 

uploaded.

•

Destination File Name

— Specifies the file name to which the Startup Configuration file is uploaded. The sys-

tem can store up-to five configuration files.

•

Transfer file name

 — Specifies the Configuration file name that is uploaded. In addition to the Startup and 

Running Configuration files, the 

Transfer file name

 field contains the five defined destination files. The possi-

ble field values are:

–

Running Configuration

 — Uploads the Running Configuration file.

–

Startup Configuration

 — Uploads the Startup Configuration file.

To upload files: 

1.

Open the 

File Upload Page

. 

2.

Define the file type to upload.

3.

Define the fields.

4.

Click 

. The software is uploaded to the device.

Summary of Contents for DES-3252P - Web Smart Switch














































































































































































































































































































Reviews:

No comments