manualshive.com logo in svg

D-Link DES-3252P - Web Smart Switch, Install Manual, Page: 206 / 301

Share
Download
D-Link DES-3252P - Web Smart Switch Install Manual Download Page 206

Configuring Quality of Service

Configuring Advanced QoS Settings

 

Page 206 

Defining Policy Profiles

This section contains information for configuring policy profiles, and includes the following topics: 

•

Defining Policies

•

Attaching Policies to Interfaces

Defining Policies

A policy is a collection of classes, each of which is a combination of a class map and a QoS action to apply to 
matching traffic. Classes are applied in a first-fit manner within a policy. 

Before configuring policies for classes whose match criteria are defined in a class map, a class map must first be 
defined, or the name of the policy map to be created, added to, or modified must first be specified. Class policies 
can be configured in a policy map only if the classes have defined match criteria.

An aggregate policer can be applied to multiple classes in the same policy map, but an aggregate policer cannot 
be used across different policy maps. Define an aggregate policer if the policer is shared with multiple classes. 
Policiers in one port cannot be shared with other policers in another device. Traffic from two different ports can be 
aggregated for policing purposes. 

To define policies:

1.

Click

 Advance Setup > Quality of Service > Policy Profiles >Policy. 

The 

Policy Page

 opens:

Figure 138:Policy Page

The 

Policy Page 

contains the following fields: 

•

Policy Name

 — Displays the user-defined policy name.

•

Remove

 — Removes policies. The possible field values are: 

–

Checked

 — Removes the selected policy.

–

Unchecked

 — Maintains policies. 

2.

Click . 

The 

Add QoS Policy Profile Page

 opens: 

Summary of Contents for DES-3252P - Web Smart Switch














































































































































































































































































































Reviews:

No comments