D-Link DES-3252P - Web Smart Switch, Install Manual, Page: 210 / 301

Configuring SNMP
Configuring SNMP Security
Page 210
Configuring SNMP Security
This section contains information for configuring SNMP security parameters, and contains the following topics:
•
Defining SNMP Security
•
Defining SNMP Views
•
Defining SNMP Group Profiles
•
Defining SNMP Group Members
•
Defining SNMP Communities
Defining SNMP Security
The SNMP Security Global Parameters Page permits the enabling of both SNMP and Authentication notifications.
To define the SNMP security parameters:
1. Click System > SNMP > Security > Global Parameters . The SNMP Security Global Parameters Page
opens:
Figure 141:SNMP Security Global Parameters Page
The SNMP Security Global Parameters Page contains the following fields:
•
Local Engine ID (10-64 Hex characters) — Displays the local device Engine ID. The field value is a hexa-
decimal string. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be sepa-
rated by a period or a colon. The Engine ID must be defined before SNMPv3 is enabled. Select a default
Engine ID that is comprised of an Enterprise number and the default MAC address.
•
Use Default — Uses the device-generated Engine ID. The default Engine ID is based on the device MAC
address and is defined per standard as:
–
First 4 octets — first bit = 1, the rest is IANA Enterprise number.
–
Fifth octet — Set to 3 to indicate the MAC address that follows.
–
Last 6 octets — MAC address of the device.
2. Define the Local Engine ID and Use Default fields.