D-Link DES-3252P - Web Smart Switch, Install Manual, Page: 124 / 301

Configuring Device Security
Configuring Management Security
Page 124
The Page also contains the following fields:
•
Host IP Address — Defines the Server IP address.
•
Priority — Defines the order in which the servers are used. The field range is 0-65535. The
default is 0.
•
Source IP Address — Defines the device source IP address used for the session between the
device and the server.
•
Authentication Port (0-65535) — Defines the port number via which the session occurs. The
default port is port 49.
•
Timeout for Reply — Defines the amount of time in seconds that passes before the connection between the
device and the times out. The field range is 1-30 seconds.
•
Single Connection — Maintains a single open connection between the device and the server.
The possible field values are:
–
Checked — Enables a single connection.
–
Unchecked — Disables a single connection.
•
Status — Indicates the connection status between the device and the server. The possible field
values are:
–
Connected — Indicates there is currently a connection between the device and the server.
–
Not Connected — Indicates there is not currently a connection between the device and the
server.
•
Remove — Removes server. The possible field values are:
–
Checked — Removes the selected server.
–
Unchecked — Maintains the servers.
2. Click . The Page opens.
Figure 73: Add Host Page
3. Define the Host IP Address , Priority , Source IP Address , Key String , Authentication Port , Timeout for Reply ,
and Single Connection .