manualshive.com logo in svg

D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt, Manual

Share
Download
D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual Download Page 94

D-Link DES-3010FA/GA CLI Reference Guide

 

Page 93 

port storm-control include-multicast

The 

port storm-control include-multicast 

Interface Configuration (Ethernet) mode command counts multicast 

packets in broadcast storm control. To disable counting multicast packets, use the 

no 

form of this command.

Syntax

port storm-control include-multicast [unknown-unicast]

no port storm-control include-multicast

Parameters
•

unknown-unicast — 

Specifies also counting unknown unicast packets.

Default Configuration

Multicast packets are not counted.

Command Modes 

Interface Configuration (Ethernet) mode

User Guidelines

To control multicasts storms, use the 

port storm-control broadcast enable

 and 

port storm-control broadcast 

rate

 commands.

Example 

The following example enables counting broadcast and multicast packets on Ethernet port 3.

Console(config)# 

interface ethernet

 3

Console(config-if)# 

port storm-control include-multicast

Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands