D-Link DES-3010FA/GA CLI Reference Guide
Page 83
set interface active
The
set interface active
Privileged
EXEC mode command reactivates an interface that was shutdown.
Syntax
set interface active
{
ethernet
interface
|
port-channel port-channel-number
}
Parameters
•
interface
— Valid Ethernet port. (Full syntax:
port
)
•
port-channel-number —
Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be active, but were shutdown by the system
for some reason (e.g.,
port security)
.
Example
The following example reactivates interface 5.
Console#
set interface active ethernet
5
Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt
Page 1: ......
