D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual Download Page 159

Page: 159 / 348

Port Monitor Commands

Page 158

port monitor vlan-tagging

The

port monitor

Interface Configuration (Ethernet) mode command transmits tagged ingress mirrored packets.

To transmit untagged ingress mirrored packets, use the

form of this command.

Syntax

port monitor vlan-tagging

no port monitor vlan-tagging

Default Configuration

Ingress mirrored packets are transmitted untagged.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures all ingress mirrored packets from port 9 to be transmitted as tagged packets.

Console (config)#

interface ethernet

Console (config-if)#

port monitor vlan-tagging

Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt





























































































































































































































































































































































Search results

Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt

Reviews:

Brands by name

Popular brands

D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt, Manual

Search results

Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt

Reviews:

Brands by name

Popular brands