manualshive.com logo in svg

D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt, Manual

Share
Download
D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual Download Page 123

IP Addressing Commands

 Page 122 

ip domain-name

The

 ip domain-name

 Global Configuration mode command defines a default domain name used by the software 

to complete unqualified host names (names without a dotted-decimal domain name). To remove the default 
domain name, use the

 no 

form of this command

.

Syntax

ip domain-name

 

name

 

no ip domain-name

Parameters
•

name — 

Specifies the default domain name used to complete unqualified host names. Do not include the ini-

tial period that separates an unqualified name from the domain name. (Range: 1-158 characters)

Default Configuration

A default domain name is not defined.

Command Mode 

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands