manualshive.com logo in svg

D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt, Manual

Share
Download
D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual Download Page 261

Syslog Commands

 Page 260 

show logging

The 

show logging

 Privileged EXEC mode command displays the state of logging and the syslog messages 

stored in the internal buffer.

Syntax

show logging

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the state of logging and the syslog messages stored in the internal buffer.

Console# 

show logging

Logging is enabled.

Console logging: level debugging. Console Messages: 0 Dropped (severity).

Buffer logging: level debugging. Buffer Messages: 11 Logged, 200 Max.

File logging: level notifications. File Messages: 0 Dropped (severity).

Syslog server 192.180.2.27 logging: errors. Messages: 6 Dropped (severity).

Syslog server 192.180.2.28 logging: errors. Messages: 6 Dropped (severity).

2 messages were not logged (resources)

Application filtering control

Application

Event

Status

-----------

-----

------

AAA

Login

Enabled

File system

Copy

Enabled

File system

Delete-Rename

Enabled

Management ACL

Deny

Enabled

Buffer log:

11-Aug-2004 15:41:43: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up

11-Aug-2004 15:41:43: %LINK-3-UPDOWN: Interface Ethernet1, changed state to up

11-Aug-2004 15:41:43: %LINK-3-UPDOWN: Interface Ethernet1, changed state to up

Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands