manualshive.com logo in svg

D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt, Manual

Share
Download
D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual Download Page 156

D-Link DES-3010FA/GA CLI Reference Guide

 

Page 155 

channel-group

The 

channel-group 

Interface Configuration (Ethernet) mode command associates a port with a port-channel. To 

remove a port from a port-channel, use the 

no 

form of this command.

Syntax

channel-group

 

port-channel-number

 

mode

 {

on

 | 

auto

}

no channel-group

Parameters
•

port-channel_number

 — Specifies the number of the valid port-channel for the current port to join.

•

on

 — Forces the port to join a channel without an LACP operation.

•

auto

 — Allows the port to join a channel as a result of an LACP operation.

Default Configuration

The port is not assigned to a port-channel.

Command Mode

Interface Configuration (Ethernet) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example forces port 1 to join port-channel 1 without an LACP operation.

Console(config)# 

interface ethernet 

1

Console(config-if)# 

channel-group 

1

 mode on

Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands