manualshive.com logo in svg

D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt, Manual

Share
Download
D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual Download Page 170

D-Link DES-3010FA/GA CLI Reference Guide

 

Page 169 

qos trust (Global)

The 

qos trust 

Global Configuration mode command configures the system to the basic mode and trust state. To 

return to the untrusted state, use the 

no

 form of this command.

Syntax

qos trust 

{

cos

 | 

dscp

}

no qos trust 

Parameters
•

cos

 — Indicates that ingress packets are classified with packet CoS values. Untagged packets are classified 

with the default port CoS value. 

•

dscp

 — Indicates that ingress packets are classified with packet DSCP values.

Default Configuration

CoS is the default trust mode.

Command Mode

Global Configuration mode

User Guidelines

Packets entering a quality of service (QoS) domain are classified at the edge of the QoS domain. When packets 
are classified at the edge, the switch port within the QoS domain can be configured to one of the trusted states 
because there is no need to classify the packets at every device in the domain.

Use this command to specify whether the port is trusted and which fields of the packet to use to classify traffic.

When the system is configured as trust DSCP, traffic is mapped to a queue according to the DSCP-queue map.

Example

The following example configures the system to the DSCP trust state.

Console(config)# 

qos trust

 

dscp

Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands