manualshive.com logo in svg

D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt, Manual

Share
Download
D-Link DES-3010FA-TAA - Switch 10/100MBPS Mgmt Manual Download Page 155

Port Channel Commands

 Page 154 

interface range port-channel

The 

interface range port-channel

 Global Configuration mode command enters the interface configuration mode 

to configure multiple port-channels. 

Syntax

interface range

 

port-channel

 {

port-channel-range 

| 

all

}

Parameters
•

port-channel-range

 — List of valid port-channels to add. Separate nonconsecutive port-channels with a 

comma and no spaces. A hyphen designates a range of port-channels.

•

all

 — All valid port-channels.

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

Commands under the interface range context are executed independently on each interface in the range.

Example

The following example groups port-channels 1, 2 and 6 to receive the same command.

Console(config)# 

interface range port-channel

 1-2,6

Summary of Contents for DES-3010FA-TAA - Switch 10/100MBPS Mgmt





























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands