![background image](http://html.mh-extra.com/html/d-link/dcs-6315/dcs-6315_user-manual_77679047.webp)
47
D-Link DCS-6315 User Manual
Section 3: Configuration
Motion Detection
Enable Video Motion
to allow your camera to use the motion
detection feature. You may define a specific area that the camera
will use for monitoring.
Enable Video
Motion:
Sensitivity:
Percentage:
Draw Motion
Area:
Erase Motion
Area:
Check the box to
Enable
the motion detection
feature of your camera.
Specifies the measurable difference between two
sequential images that indicates motion. Enter a
value between zero and 100.
Specifies the amount of motion in the window
being monitored that is required to initiate an
alert. If this is set to 100%, any motion detected
within the entire window triggers an alert.
Draw the motion detection area by dragging your
mouse within the window (indicated by a red
square).
To erase a motion detection area, simply click on
the red square that you wish to remove.
Right clicking on the camera image brings up the
following menu options:
Select All:
Draws a motion detection area over
the entire screen.
Clear All:
Clears any motion detection areas
that have been drawn.
Restore:
Restores the previously specified
motion detection areas.
Click
Save Settings
to save your changes.
DCS-6315