D-Link DCS-6315 User Manual Download Page 57

Page: 57 / 71

D-Link DCS-6315 User Manual

Section 3: Configuration

SD Card

Files per Page:

Refresh:

Delete:

Format SD Card:

View Recorded

Picture:

Playback

Recorded Video:

Select a number of files to view at once from the

drop-down menu.

Click on the

Refresh

link to reload the file and

folder information from the SD card.

Check the box by the link(s) to the file(s) you would

like to remove and click

Click this button to automatically format the SD

card and create

Picture

and

Video

folders.

If the picture files are stored on the SD card, click

on the

Picture

link and choose the file(s) you

would like to view.

If video files are stored on the SD card, click on the

Video

link and choose the file(s) you would like to

view.

You can manage the video files that are stored on the SD card.

Organize and view pictures and recorded video.

DCS-6315

Summary of Contents for DCS-6315








































































Search results

Summary of Contents for DCS-6315

Reviews:

Related manuals for DCS-6315

Brands by name

Popular brands

D-Link DCS-6315, User Manual

Search results

Summary of Contents for DCS-6315

Reviews:

Related manuals for DCS-6315

Brands by name

Popular brands