16
D-Link DCS-6315 User Manual
Section 2: Assembly and Installation
Step 3
After remove the mounting plate from the lower half of the
camera housing, the DCS-6315 can be attached to a wall or
ceiling using the
Alignment Sticker
. Refer to
"Deploying the
Camera" on page 13
.
If you will be installing the camera onto a surface that cannot
house the cable, the cable access part can be removed so
that the cable can exit the camera housing easily. Once the
mounting plate has been removed, you will be able to remove
the cable access panel.
If you will be routing the connection cables through a wall or
ceiling, you should leave the cable access part attached, as it
will help protect the cable from vandalism.
Step 4
Slide the lower half of the camera housing onto the mounting
plate and re-secure it. Make sure that the cable sheath extends
out of the base in a way that ensures the cable is not kinked
or twisted.
