59
D-Link DCS-6315 User Manual
Section 3: Configuration
You can configure the ICR (
Removable IR-Cut Filter
) and IR (
Infrared
Light Control
) settings. When the ICR filter is switched on, it
blocks infrared light and allows only visible light to pass through.
The ICR filter is disengaged for increased sensitivity in low-light
environments.
Automatic:
Day Mode:
Night Mode:
Schedule
Mode:
IR Light
Control:
Off:
On:
Sync with ICR:
Schedule:
Click
Automatic
if you want the
Day/Night
mode
to be set automatically. Generally, the camera will
use
Day mode
and switch to
Night mode
when it
gets dark.
Click
Day mode
to enable the IR Cut Filter.
Click
Night mode
to disable the IR Cut Filter.
Click
Schedule mode
to set up the
Day/Night
mode
using a schedule. Select a starting time for
the camera to enter
Day mode
, and an ending
time for the camera to change to
Night mode
.
The camera can enable or disable the IR (infrared)
light control according to the light conditions.
Click on
Automatic
and make a selection from the
drop-down menu.
Click
Off
so the IR light control is always disabled.
Click
On
so the IR light control is always enabled.
The IR light will turn on when the ICR sensor is on.
Click
Schedule
so the IR light control will turn on
or off according to the schedule that you specify.
Click
Save Settings
.
ICR and IR
DCS-6315
