35
D-Link DCS-6315 User Manual
Section 3: Configuration
This
Setup Wizard
will guide you through a step-by-step process to
configure your IP camera's motion detection functions.
Click
Next
to continue.
Motion Detection Setup Wizard
Step 1
This step will allow you to enable or disable motion detection, and
adjust the sensitivity of your camera’s ability to detect movement.
Check the box by
Enable Video Motion
to enable motion detection.
Click on the radio button to indicate if the camera should capture a
Snapshot
or a
Video Clip
whenever motion is detected.
Refer to
"Motion Detection" on page 47
for details about how to
configure motion detection.
Step 2
This step allows you to enable motion detection based on a
customized schedule. Click on
Always
to make sure your camera
always records whenever motion is detected. Or click on
From
and
specify the day and hours you want motion detection enabled.
Click on
Next
to continue.