3
Using the Configuration Menu (continued)
Advanced > Multi-SSID(continued)
Index-
The Primary SSID and Security cannot be changed here.Those values
follow the setting in Home>Wireless.
SSID-
When you
Enable Multi-SSID
you can name each Multi-SSID.
Key Type-
Key Size-
Key-
VLAN
Group ID-
Select HEX or ASCII
Select 64-,8-,5-bits
Select the st through the 4th key to b the active key. Enter key here.
When you
Enable VLAN State
and configure internal and
Multi-SSID
networks on VLANs, this field will be enable.
Provide a number between and 4094 for internal VLAN.
This will cuase the access point to send DHCP request woth the VLAN
tags. The switch and the DHCP server must support VLAN IEEE80.Q
frames.The access point must be able to reach the DHCP Server.
Check with the Administator greading the VLAN and DHCP configurations
The Security option for these seven Multi-SSIDs are
None, Open System or Shared Key, WPA-EAP, WPA-PSK,
WPA2-EAP, WPA2-PSK, WPA-Auto-EAP, WPA-Auto-PSK
Security-
Advanced > Multi-SSID > WEP Encryption
Advanced > Multi-SSID > WPA-PSK, WPA2-PSK, WPA-Auto-PSK
Cipher
Type:
Group Key
Update Interval:
Select the interval during which the group key wll be valid. The
default value of 800 is recommended.
Select
AES
,
AUTO
or
TKIP
from the pull down menu.
PassPhrase:
Enter a
PassPhrase
in the corresponding field.
Note: If any of the SSID uses security of WPA-PSK, WPA-PSK, WPA-Auto-PSK,
WPA-EAP, WPA-EAP, WPA-Auto-EAP, it will occupy the key space and 3, leaves
only key and key 4 for other SSIDs to use for WEP key.
The Multi-SSID’s security can be WPA-EAP, WPA-EAP, or WPA-Auto-EAP only when
the Primary SSID’s security is at the same security level. Also, they must connect to the
same RADIUS server.
Summary of Contents for AirPremier DWL-00AP
Page 1: ... ...
Page 10: ...10 Operational Modes ...
