77
Troubleshooting (continued)
• Go to
Start
• Right-click on
My Computer
• Click
Properties
Make sure the wireless client is associated and joined with the correct access point. To
check this connection:
Right-click
on the
local area connection icon
in the taskbar>
select
View Available Wireless Networks
. The
Connect to Wireless Network
screen
will appear. Please make sure you have selected the correct available network, as
shown in the illustration below.
Check that the
IP address
assigned to the wireless adapter is within the same
IP
address range
as the access point and gateway.
(Since the DWL-2200AP has
an IP address of 192.168.0.50, wireless adapters must have an IP address in
the same range, e.g., 192.168.0.x. Each device must have a unique IP address;
no two devices may have the same IP address. The subnet mask must be the
same for all the computers on the network.)
To check the
IP address
assigned
to the wireless adapter,
double-click
on the
local area connection icon
in
the taskbar > select the
Support tab
and the
IP address
will be displayed.
(Please refer to
Checking the IP address
in the
Networking Basics
section
of this manual.)
If it is necessary to assign a
static IP address
to the wireless adapter, please
refer to the appropriate section in
Networking Basics
.
If you are entering a
DNS
server address
you must also enter the
default gateway address.
(Remember
that if you have a DHCP-capable router, you will not need to assign a static IP
address. See
Networking Basics: Assigning a Static IP Address.
)
default
2. The wireless client cannot access the Internet in Infrastructure
mode.
Summary of Contents for AirPremier DWL-00AP
Page 1: ... ...
Page 10: ...10 Operational Modes ...
