5
CAUTION:
The KCU-1P works with a D-BOX G2 or G3 ACM. Never connect the KCU-1P to an
ACM-I (G1).
The KCU-1P comes with an installation bracket and a power supply. It has 2 ports and a power input jack.
PORTS / JACK
RECOMMENDED CABLE
COMMENTS
MASTER OUT
Use a shielded CAT.5e or CAT.6e cable to
connect the KCU-1P to a D-BOX ACM G3
(Actuator Control Module).
Make sure you use a shielded CAT.5e or CAT.6e
cable and the RJ-45 at each end features a metal
jacket.
Connect one end of the cable to the MASTER OUT
port of the KCU-1P.
Connect the other end of the cable to the MASTER
IN Port of the ACM G3.
The total length should be 100 ft. (30.5m) or
less – KCU-1P to last seat.
USB
Use a USB-A / USB-B cable to connect the KCU-
1P to the Windows base computer.
Connect the USB-B end of the cable to the USB
port of the KCU-1P.
Connect the USB-A end of the cable to the USB
port of the computer.
The total length of the USB cable should be 6 ft
(1.8m) or less.
POWER
100 – 230VAC, 50 - 60Hz, 0.63A
Output: +48VDC
Always connect the power cable to a grounded
receptacle.
