13
M
OTION
S
YSTEM
A
CCESSORIES
Use only D-BOX certified accessories. Using accessories that are not D-BOX certified voids the warranty and can
result in damages to the Motion System.
Power converter
Past generation of D-BOX products were 120V native and to be used with a custom step-down transformer
made specifically to respect certification requirements for 230V configurations. The G3 systems can be ordered
in 120V or 230V version without an external step-down transformer.
CAUTION:
120V and 230V ACM are NOT THE SAME PRODUCT. They need different internal
components and need to be ordered from the factory for the right configuration.
As D-BOX is not providing an external step-down transformer, you will need to assure power conversion by your
own means if needed. To select your converter, please follow the power requirement listed in the spec sheets
for your specific configuration.
Other than power requirement, D-BOX would like to suggest the use of an isolated converter to avoid risks of
electrical shock. If a non-isolated converter is selected, please make sure to secure ground connection.
Pivot
When using a 2-actuator Motion System, D-BOX provides a pivot as a third attachment point to ensure proper
actuator movement. D-BOX suggests locating the pivot near the center of gravity, to support most weight and
allow equal weight distribution on the actuators.
NOTE
: the closer the actuators are to the CG, the larger the movement you get. A CG that’s very
close would create strong forces on actuators and might reduce stability. Make sure that
actuators are always under charge.
Captive Endings
Go to the Removal/Installation section for details about the captive endings.
