14
R
EMOVAL
/I
NSTALLATION PROCEDURES
H-Bracket for 1.5 in HD Actuator - AC10
Removal
1.
Remove bolt (9) and pivot (8).
2.
Remove bolt (7) and end piston adapter (6).
3.
Remove bolt (5), lockwasher (4), stop (3), and H-plate (2) from housing (1).
Installation
NOTE
: Apply one drop of Loctite 243 blue threadlocker on bolts (5), (7) and (9) before
installation.
1.
Align holes on H-plate (2) with holes on housing (1) and align holes on stop (3) with holes on H-plate (2),
and then secure with lockwasher (4) and bolt (5). Torque bolt (5) to 98 lbf.in.
2.
Align holes on end piston adapter with holes on piston end and secure end piston adapter (6) with bolt
(7). Torque bolt (7) to 40 lbf.in.
3.
Secure pivot (8) on end piston (6) with bolt (9). Torque bolt (9) to 130 lbf.in.
