24
6-inch actuator - AC360
Unscrew bolt (1) with the ½ hex key and remove
pivot (2) and spacer (3) from actuator (4).
Add Loctite 263 to the threaded section.
Screw the threaded section in the actuator (1). Use a
torque wrench with a 5/8 crow foot socket to tighten
the ball joint assembly (2) in the actuator. Torque to
170 lbf in.
Place spacer (3) at its required location.
Make sure the holes in the spacer are aligned with
the holes in the floor and place the actuator and ball
joint assembly in spacer (3).
