1
7
SETTING THE MOTOR DIRECTION
GATE CLOSING TO THE LEFT
BLUE WIRE
BLACK WIRE
GATE CLOSING TO THE RIGHT
BLUE WIRE
BLACK WIRE
It is important to set the motor direction
, as this will influence the programming of the motor and
the security of the motor. The motor is set to automatically close whenever the power is applied and
the test button is pressed for the first time. If the gate runs open when the test button is pressed
during programming it means that the motor wires are incorrect. The motor wires are the two wires
that extend from the electric motor and are connected to the main PC board.
The other reason that the setting of the motor direction is important, is that the motor will automati
cally drive to the closed position after a prolonged power failure (if the gate is in the open position).
Setting the correct motor direction will, in this situation, prevent the gate from suddenly opening and
remaining in the open position.
The following diagrams show the correct wiring of the electric motor to the main PC board. The
motor wires are found extending from the motor, there are two wires, one wire is blue the other
wire is black.
Closing direction
Closing direction
