D.A.C.E SPRINT, Manual

Page: 15 / 21

1
5
This PC board is a very sensitive piece of equipment and must be handled with extreme care. The
electronic components that are found on the board are sensitive to static electricity and should not
be handled or tampered with unless by an authorized D.A.C.E. agent. It is safe to connect electrical
wiring to the wiring connectors on the board, but this must be done according to the instructions in
this manual. It is very important to remember to disconnect ALL power before connecting or discon­
necting any wiring.
MAIN P.C.BOARD LAY­OUT
LED extension con­
nector
Rev Counter
connector
Marker
connector
Current Sensing
pots
Auxiliary
connectors
Infra Red jumper
Program jumper
Open/Close/Status LED
Learn / Erase remote
jumpers
Test button
Motor wire connectors
20 amp motor fuse x 2
16 Volt AC connector
from transformer
Earth wire
Green & Yellow
Battery wires
Light/Lock connector
Dipswitches
LCD screen connector
On board receiver