3
·
It is recommended that your local Electrical Contractors Association is contacted in
order to obtain
the legal wiring regulations pertaining to the area.
·
Electrical Shock may occur while installing this equipment.
·
Injury or death by electrocution may lead to law suits against the installer/homeowner.
·
If you intend to run 220V/AC directly from the Mains supply (house supply) to the transformer,
the
wiring should be done by a qualified/registered electrician. This is a legal requirement and
failure
to do so may lead to noncompliance of property or law suits against the property owner
in the
event of an accident.
·
It is a legal requirement to run all cabling in conduit. The power supply must be run in a separate
conduit to ANY other cables.
·
Mains supply may only be run in a guarded cable. Under no circumstances may 220V/AC be run
using Communication cable, Ripcord or Cabtyre.
·
BMG Imports
will not be held liable for any accident / incident resulting in damage, injury or death
ensuing from the installation of the automatic gate motor.
·
Although the
SPRINT and CONDO
operators have
builtin collision sensing,
substantial damage
may
still occur. For this reason safety beams should be used on all
installations.
·
Do not allow children to play near or with any gate, gate motor or remote control.
·
It is the responsibility of the installer to ensure that the gate is in good working condition before
automating the gate.
·
BMG Imports
will not be held responsible for any gates bumping the ends stops when a gate is
aut
o
mated on a slide.
·
Assorted screw drivers – phillips and flat
·
17mm spanner
·
17mm socket
·
Tape measure
·
Spade
·
Pick
·
Spirit level
·
Drilling machine
·
Steel drill bits
·
Masonry drill bits
·
Hammer
·
Multi Meter
·
Side cutters
LEGAL REQUIREMENTS AND WARNINGS FOR INSTALLING THIS EQUIPMENT
RECOMMENDED TOOLS