Arming from the Telephone
Comfort can be armed from an internal phone or a remote phone. From
the house phone, press * and enter your user code (default 1234) and
the # key. From a remote phone, call home and wait for Comfort to
answer, and while the greeting message is playing, press * and enter
your user code (default 1234) and the # key. The Voice menu will be
heard. Press 1 to Arm Security System; The Arm Security Menu is;
Press 1 for Away Mode
2 for Night Mode
3 for Day Mode
4 for Vacation Mode
Press # to End
Select which mode to arm to.
If zones are open while arming, press *# on the telephone keypad to
Force-arm (ie automatically bypass the open zones) the system,
provided this operation is enabled in your system.
Security Off / Stop Alarm
To disarm, i.e. to turn off security, enter your user code (default 1234#)
on the keypad.
DO NOT press * before your code, as this will go into user menu
instead of disarming.
The red Armed/Alarm LED indicator turns off and the green
Home/Trouble LED indicator turns on to show that security is off, and the
voice says “Security Off”.
If the Entry door is opened when the system is armed to any mode
(Away, Night, Day, Vacation) an entry delay will be started to allow time
for people coming home to disarm the system. During Entry Delay, the
keypad beeps and the red Alarm/Alarm indicator flashes. Disarm the
system to Security Off during the entry delay. If a valid code is not
entered in the allowed time, an Intruder Alarm will be triggered.
When an alarm occurs, causing the sirens to sound, you can turn silence
the alarm by entering your code (default 1234#). Entering the code (and
# key) during an alarm, or when the system is armed will turn off
security.
Do not press the * key
before the code, as this will go
into voice menu and not turn off the security or alarm.
If you do
get into the voice menu, press 0 for Security Off to disarm.
Do not disarm the security system unless you are sure that there
is no intrusion into the premises.
Comfort II User Manual
19