CYP SDV-CS8, Operation Manual

Page: 34 / 48

34
■ MultiView Layout Selection:
This a scrollable list of pre made
MultiViewer layout designs. Click on the design that best matches
your layout and source count requirements to place it in the layout
window to the right.
Note: Customised layouts are not currently supported.
■ Transmitter Selection:
This is a list of all available transmitters
in the system. Drag and drop each transmitter to it’s preferred
position within the MultiView layout above the list. After
placement, each transmitter’s name will be displayed within the
selected window in the MultiView layout and the window will turn
green. Blue windows within the MultiView layout indicate that no
source has been assigned to it yet, and red windows indicate that
a source has been assigned, but the stream is not currently active.
■
Save Preset: Click this button to save changes to the current
MultiView configuration without executing or activating it.
■ Execute:
Click this button to save changes to the current
MultiView configuration and then execute the changes. If the
MultiView output was not already active on the selected receiver,
this will also activate it.