CYP SDV-CS8, Operation Manual

Page: 25 / 48

25
■ Icon:
Displays the icon used to represent the unit.
Note: If a transmitter’s streams require more bandwidth than is
available, a warning icon ( ) will be displayed instead of the normal
source icon. Video output from a source displaying this icon may
become visually unstable. It is recommended to either lower the
resolution or framerate of the stream.
■ Order:
Use the dropdown to reorder the units in the list. Changing
the order here will also change the order the units are listed in
other tabs.
■
Name: Displays each unit’s current assigned name.
Note: The name can be changed within “Device Settings”.
■
IP Address: Displays each unit’s current IP address.
■ Video Info:
Clicking this button will display a pop-up window
containing detailed information about the current video source.
When no live video is detected the button will be red.
Note: If no live source is detected the button will turn red.
■ Network Settings:
Clicking this button will display a pop-up
window containing detailed information about the unit’s current
network settings, including IP mode, and allow for those settings
to be changed. To activate any changes made, please click on the
“Save” button to close the window.
■
RS-232 Settings: Clicking this button will display a pop-up
window containing detailed information about the unit’s current
RS-232 settings, including baud rate, and allow for those settings
to be changed. To activate any changes made, please click on the
“Save” button to close the window.
■ USB Settings:
Clicking this button will display a pop-up window
containing detailed information about the unit’s current USB
settings, including enabling or disabling simultaneous mode
support. To activate any changes made, please click on the “Save”
button to close the window.
Note: USB functionality is not supported by all SDVoE units.