26
2) Device Settings:
Clicking this button will display a pop-up window
providing control over a number of important device settings and
allow for those settings to be changed. To activate any changes made,
please click on the “Save” button to close the window.
■
Version:
Display the unit’s current firmware version.
■
System Command:
Use the dropdown to select a system
command to send to the unit. Available commands are:
– Factory Reset:
Reset the unit back to its factory default
settings.
– Reboot:
Reboot the unit.
– Firmware Update:
Update the firmware of this unit using the
currently uploaded firmware file.
– Transform (Transceivers only):
Switch the unit into receiver
mode.
■
Name:
Change the unit’s name (19 character maximum).
■
Audio Port Direction:
Define the analogue audio port as an input
or output.
■
HDCP Support:
Enable or disable support for HDCP 1.4 or lower
sources.
■
HDCP 2.2 Support:
Enable or disable support for HDCP 2.2
sources.
■
Bypass Divide FPS by two:
Enable or disable the Divide FPS
(Frames Per Second) by Two feature on the primary video stream
generated by this unit. Enabling this mode will cut bandwidth
usage of the unit nearly in half at the cost of a 50% framerate
reduction.
Note: When this mode is enabled, it is not recommended to use Bypass
Summary of Contents for SDV-CS8
Page 1: ...OPERATION MANUAL SDV CS8 SDV System Controller Configurator...
Page 2: ......
Page 47: ......
