CYP SDV-CS8, Operation Manual

Page: 24 / 48

24
6.6.3 Settings Tab
This tab's functionality is not currently available and will be added in the
“Phase 2” update.
6.6.4 Transmitter Tab
This tab shows all transmitters that have been detected by the unit.
Details about each transmitter’s name, IP address, and video content, as
well as options to configure the network, RS-232, USB, and general device
settings are also provided.
Note: Units that were previously a part of the system, but are not currently
detected will still be displayed, however they will have a disconnected icon (
) and cannot be used for routing. These units may be removed from the list
using the “Remove” button.
1) Transmitter Configuration:
■ Remove:
Click on this button to remove any transmitter from
the list that has the disconnected icon ( ). The pop-up window
provides a dropdown to select the unit to be removed. Once the
selection has been made, click on "Confirm" to apply the change.
Note: Only disconnected transmitters can be removed.
■ Hello:
Clicking on this switch will cause the selected unit to
immediately begin flashing the power LED on the front of the unit
to make it easy to find. Clicking it a second time returns the LED to
its normal behavior.
Note: The “Hello” function is not supported by all SDVoE units.