29
2) Device Settings:
Clicking this button will display a pop-up window
providing control over a number of important device settings and
allow for those settings to be changed. To activate any changes made,
please click on the “Save” button to close the window.
■
Version:
Display the unit’s current firmware version.
■
System Command:
Use the dropdown to select a system
command to send to the unit. Available commands are:
– Factory Reset:
Reset the unit back to its factory default
settings.
– Reboot:
Reboot the unit.
– Firmware Update:
Update the firmware of this unit using the
currently uploaded firmware file.
– Transform (Transceivers only):
Switch the unit into
transmitter mode.
■
Name:
Change the unit’s name (19 character maximum).
■
HDMI Audio Source:
Select the audio source type to embed with
the HDMI video output of this unit. Available options are:
– HDMI Audio (Follow Video In Genlock):
Output the HDMI
audio routed to this unit unless the receiver has been set to
“Bypass Mode” in the scaling tab. When “Bypass mode” is active,
only the native HDMI audio from the routed video source can
be output.
– Analogue Audio:
Output the analogue audio routed to this
unit.
– HDMI Audio (Stereo Downmix):
Output the HDMI audio
routed to this unit after downmixing it to LPCM 2.0.
Note: This mode only supports HDMI sources with LPCM audio.
– HDMI Audio (All Channel):
Output the HDMI audio routed to
this unit.
Note: This mode only supports HDMI sources with LPCM audio.
Summary of Contents for SDV-CS8
Page 1: ...OPERATION MANUAL SDV CS8 SDV System Controller Configurator...
Page 2: ......
Page 47: ......
