CYP SDV-CS8, Operation Manual

Page: 13 / 48

13
Clicking the “Logout” button within the “System” tab will automatically log
the currently connected user out of the WebGUI and return to login page.
Note: When not logged in, only the “Monitor & Control” and “System” tabs are
available.
6.6.1 Monitor & Control Tab
This tab provides easy to use drag-and-drop control over all basic routing
functionality of the transmitters and receivers that have been detected
within the local network. Transmitters are represented by the source
icon ( ) and receivers are represented by the display icon ( ). Each of
this tab’s sections control the routing of a different type of interface that
can be found on most compatible transmitters, receivers or transceivers.
These interfaces are: Video routing, HDMI Audio routing, Analogue Audio
routing, USB routing, IR routing, and RS-232 routing. This tab’s controls are
available even when a user is not logged in, providing basic control over
routing without exposing system critical configuration areas.
Note: Units that were previously a part of the system, but are not currently
detected will still be displayed, however they will have a disconnected icon (
) and cannot be used for routing.
1) Video Routing:
Provides drag-and-drop control over the video
routing between all detected transmitters and receivers.
■
Video Transmitter:
This section provides drag-and-drop buttons
for all transmitters detected by the system as well as a button
target to stop one or all video streams from being transmitted.