31
6.6.7 Video Wall Tab
This tab provides a way to configure or modify video walls using multiple
receivers in a group. All aspects of the video wall can be configured here
including dimensions (up to 8x8 displays), bezel compensation, output
resolution, and source.
1) Video Wall Setup:
The upper left section of this tab contains a list
of all currently defined video walls in the system. To edit an existing
video wall, select it from the list of “Video Wall Preset Names”, to start
work on a new video wall, click on the “+” symbol. To delete an existing
video wall select the name and then click on the trash icon.
Note: Deleting a video wall preset will not disable the video wall it
described if it is currently active. To completely remove a video wall, new
sources need to be routed to those displays, or the output needs to be
disabled from the Monitor & Control Tab.
■
Group Name:
Set the name of the video wall group here.
■
Transmitter:
Select the transmitter to use as the video source for
the video wall.
■
Display Resolution:
Select the resolution for all receivers in the
video wall to output to their connected displays.
Summary of Contents for SDV-CS8
Page 1: ...OPERATION MANUAL SDV CS8 SDV System Controller Configurator...
Page 2: ......
Page 47: ......
