CYP IP-CS7, Operation Manual, Page: 8 / 36

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER IR
IP Master Control
1 2
1 POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
2 IR WINDOW:
Accepts IR signals from the included IR remote for
control of this unit only.
6.2 Rear Panel
LAN 1(POE) LAN 2 USB HDMI OUT RS-232 CONTROL IR EXT
DC 5V
TRIGGER IN
TX RX
1 2 3 4 5 6 7 8 9
1 IR EXT:
Connect to the provided IR Extender to extend the IR control
range of the unit. Ensure that the remote being used is within direct
line-of-sight of the IR Extender.
2 CONTROL:
Connect to the device you wish to control via a 3 (or 5)-pin
adapter cable to send RS-232 commands from the unit.
3
RS-232: Connect to a PC, laptop or other serial control device with a
3-pin adapter cable to control the unit via RS-232.
4
TRIGGER IN: Connect to the Trigger Control Keypad (OPTIONAL) or
any device with trigger switch functionality such as window security
alarms, motion detectors, door switches, etc. Each of the 8 trigger
inputs will activate the associated preset when triggered. A minimum
of 5V DC is required to activate the trigger.
5 HDMI OUT:
Connect to a standard HDMI display to view the unit’s
current status information and access the WebGUI directly without
a PC.