CYP IP-CS7, Operation Manual, Page: 20 / 36

20
6.8.1 Monitor & Control Tab
This tab provides a graphical representation of all current Transmitters,
Receivers and video groups. It also provides a simple way to change video
routing by using drag and drop. Using the slider switch at the top of the
tab, video thumbnails may be set to automatically update (Auto Refresh),
or to only update when the “Refresh” button is clicked (Manual Refresh).
i
This tab is fully functional even when the user is logged out.
Source Preview
This window displays preview thumbnails from all detected Transmitters
along with their assigned names. If Auto Refresh is enabled, the
thumbnails will update aproximately once every second. To route a
Transmitter’s source to a different Receiver, or to a video group, drag-and-
drop can be used. Click and drag the thumbnail from the Preview side to
drop it onto the prefered Receiver or Display Group on the Zone side.
Zone Preview
This window displays preview thumbnails from all detected Receivers
along with their assigned names. If Auto Refresh is enabled, the
thumbnails will update aproximately once every second. All available
Display Groups are also displayed here, however no preview thumbnail
will be displayed for them. Display Groups are defined within the Setting
tab.
i
Due to the potential for the displays within a video group to be showing
different sources, video groups will not show a thumbnail image.