CYP IP-CS7, Operation Manual, Page: 30 / 36

30
-
IP Mode & IP Settings: The IP mode of each unit may be switched
between “Auto IP”, “DHCP” or “Static IP”. When the unit is set to Auto
IP mode it will automatically assign itself an APIPA address from the
169.254.XXX.XXX range. When the unit is set to DHCP mode it will
attempt to automatically obtain an IP address from a DHCP server.
When the IP mode is set to static IP, you can manually set the IP
address, netmask and gateway address.
i
The default network setting is “Auto IP”.
-
Serial Settings:
Set the desired baud rate, data bits, parity, and stop
bits for the unit’s RS-232 extension function.
i
Linked Transmitters and Receivers must have the same serial settings.